GIMAN
LoRaWAN sensors · predictive monitoring

Catch the failure
before it happens.

Wireless vibration sensors on the motors, pumps and fans that have no monitoring today. Battery powered, magnetic mount, no cabling.

How it works

A sensor on the machine, a gateway on the roof, a report on your screen

Khomp NIT 21LV vibration sensor
Khomp NIT 21LV vibration sensor
  • Three axes: RMS, peak to peak, crest factor, kurtosis and vibration velocity in mm/s under ISO 10816-3.
  • Two modes: periodic readings, or an event the moment a threshold is crossed.
  • LoRaWAN radio: one outdoor gateway covers a wide area of the plant. IP65, with cellular backup.
  • The network server can run on site or in the cloud. The data stays yours.

X axis

Unbalance, looseness, resonance.

Y axis

Foundation and stiffness.

Z axis

Misalignment, coupling, axial load, bearings.

It does not replace your monitoring system. It covers the equipment that system does not reach.

Live example

From the map of the fleet down to one axis of one motor

Pick a plant, then a machine. Click an event on the chart to see which axis moved, the likely cause and what to do.

Vibration monitoring report

Sample plants · pick one on the map

PDF
CT Escobedo6 machines · 11 % NOKCCC Dulces Nombres6 machines · 1.5 % NOKCCC Altamira V6 machines · 0 % NOK
Plants most likely to have a motor failure

% NOK = share of readings over the alert limit in the last 47 hours.

Sample plants, machines and readings, to show how the report looks. With the sensors installed, the same screens fill with your data.

Pilot

How we would start

1 · Pick 10 machines

Balance-of-plant equipment with no online monitoring.

2 · Install in a day

Magnetic mounts and gateways. No shutdown.

3 · Baseline

A few weeks of data set each machine's own limits.

4 · Decide

With the report in hand, you choose what to extend.

Next

Torque audit: every jackbolt measured, and a report that builds itself

Shall we go through it with your team?

Write to us and a GIMAN specialist answers the same day.